Diligent Defense Co.DTF-STI 338/8.6BLK
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
length
6.75″
weight
9.2oz
MSRP
$800
length
6.75″
weight
9.2oz
calibers
.338+
material
Titanium
interface
HUB 1.375x24
MSRP
$800
- Overall length
- 6.75″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 5.3″–22.5″
- Median
- 9.16″
- Diameter
- 1.63″
- Weight
- 9.2 oz
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 6.85 oz–105.3 oz
- Median
- 19 oz
- Material
- Titanium
- Max caliber
- .338 Cal / 8.6mm
- Base interface
- HUB 1.375x24
- Front cap
- Dead Air R-Series
- MSRP
- $800
- Class
- Large Bore (.338+)
- n
- 99
- Range
- $499–$5,495
- Median
- $1,155
Shorter than most Large Bore (.338+) suppressors
Length compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most Large Bore (.338+) suppressors
Weight compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Cheaper than most Large Bore (.338+) suppressors
MSRP compared against the 99 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Dead Air R-Series
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Diligent Defense Co. Ti Direct Thread Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Calibers: Up to .338LM/8.6 (bore 0.400″)
- Min barrel: .338LM - 22″
- Min barrel: 8.6BLK Subs - 8″min
- Min barrel: 8.6BLK Supers - 12″min
Show all 13 ▾ ▴
- Firing schedule: .338LM - 10 shots before a cool down period
- Firing schedule: 8.6BLK subs - unlimited (keep below 800 degrees)
- Firing schedule: 8.6BLK Supers - 30 shots before a cool down period (keep below 800 degrees)
- Same insane weight to DB reduction ratio.
- It is best used where maximum sound suppression and lightweight is required.
- No BS lifetime warranty when following barrel length and firing schedules.
- The DTF-STI is our S length titanium suppressor for the 8.6/.338 crowd.
- Direct thread available: M18 x 1.5 titanium (8.6BLK) (Sold Separately)
- Mounting options: Anything Bravo or 1-3/8x24 thread