Daniel DefenseWave QD 7.62
.30 Cal / 7.62mm suppressor · Daniel Defense Wave interface · specs and compatibility from the manufacturer
Notable features
- Multi-Caliber
- Full-Auto Rated
length
7.6″
weight
17.2oz
MSRP
$1,050
length
7.6″
weight
17.2oz
calibers
5.56–.30
material
Steel · Inconel
interface
Daniel Defense Wave
MSRP
$1,050
- Overall length
- 7.6″
- Diameter
- 1.5″
- Weight
- 17.2 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Inconel / Stainless Steel
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- Daniel Defense Wave
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- MSRP
- $1,050
Heavier than most .30 Cal / 7.62mm suppressors
medianTHIS SUPPRESSOR · 17.2 oz
4.4 oz39.8 oz
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- Daniel Defense Wave
- Front cap
- Fixed
This suppressor's Daniel Defense Wave takes no separate mount. 2 muzzle devices in our catalog attach to it directly.
Which ones fit your barrel and host?
Check in the BuilderUnattributed
- The DD WAVE Muzzle Brake is available in 5/8 x 24 TPI threading for 7.62 caliber use.
- The DD WAVE Muzzle Brake is rated for use with suppressor-compatible mounting systems.
- A .30 caliber suppressor can be used on a 5.56 rifle if the suppressor is rated for 5.56 and the mount is correct, offering flexibility across multiple rifles.
- The DD4 V7 SLW features a pinned and welded Dead Air Xeno muzzle device that allows any hub-compatible suppressor to be run without changing the muzzle device.
Show all 10 ▾ ▴
- The DDM4 PDW 300 Blackout requires the silver buffer spring (included in the case) to cycle properly when a suppressor is added due to increased back pressure.
- The DDM4 PDW in 5.56 also requires the silver standard buffer spring for proper cycling when suppressed.
- The Daniel Defense Wave QD mounting system uses a 5/8 x 24 TPI muzzle brake for 7.62 caliber rifles.
- Most 14.5-inch pinned-and-welded Daniel Defense rifles are NOT compatible with a suppressor due to the pinned and welded muzzle device, with the exception of the DD4 V7 SLW.
- The DD WAVE Muzzle Brake (5/8 x 24 TPI) is priced at $167.00 with free shipping.
- The SoundGuard DT Suppressor Adapter (5/8-24) is available in both standard and titanium variants, at $91.00 and $114.00 respectively, for use with 7.62 suppressors.