Creative ArmsCA30W Welded Series Rifle Suppressor
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
length
8.75″
weight
21oz
MSRP
$850
length
8.75″
weight
21oz
calibers
5.56–.30
material
Titanium · Steel
interface
HUB 1.375x24
MSRP
$850
- Overall length
- 8.75″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.75″
- Weight
- 21 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- 17-4 Stainless Steel, Grade 5 Titanium
- Finish / treatment
- Raw, Black Cerakote, FDE Cerakote, Sniper Gray Cerakote
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- MSRP
- $850
Longer than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Weighing in at just 21 oz, this is our lightest suppressor to date without compromising durability or performance.
- Outside diameter 1.75"; total length 8.75" without entrance cap.
- This next-generation welded design eliminates the traditional outer tube, allowing the baffle structure to serve as the suppressor body. The result is a stronger, more efficient design with reduced weight across nearly every component.
- At its core is our refined 50 degree + 110 degree baffle geometry, trusted, tested and further optimized through years of development.
Show all 9 ▾ ▴
- Engineered for versatility, this suppressor is HUB compatible and available with 1/2x28, 5/8x24 or our F.U. mounting system, making it fully compatible with our F.U. line of muzzle devices (muzzle device sold separately).
- Construction: (1) 17-4 stainless steel blast chamber, (8) 17-4 stainless steel 50 degree + 110 degree design internals and (1) Grade 5 Ti lightweight exit cap.
- Creative Arms firearms and suppressors are warranted to be free from defects in material and/or workmanship under normal use and conditions for a period of one year from the date of purchase, to the original owner.
- Mount selection of (1) Grade 5 Ti 1/2x28 TPI entrance cap, (1) Grade 5 Ti 5/8x24 TPI entrance cap or (1) Grade 5 Ti F.U. adapter. Colour choice: black, FDE or sniper gray Cerakote, or raw.
- There are no returns on suppressors once you have received your tax stamp approval. If your tax stamp is denied, you will be assessed a 25% restocking fee.