CMMGZEROED 36
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
- Sealed
length
7″
weight
15oz
MSRP
$799
length
7″
weight
15oz
calibers
5.56–.338+
material
Steel
interface
HUB 1.375x24
MSRP
$799
- Overall length
- 7″
- Diameter
- 1.5″
- Weight
- 15 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Nitride
- Max caliber
- .36 Cal / 9mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $799
Heavier than most 9mm / .36 Cal suppressors
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including CMMG ZEROED HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Features a tubeless laser welded 17-4 stainless steel baffle design.
- Receives a surface-hardening nitride finish that resists corrosion and simplifies cleaning, compatible with nearly any solvent or ultrasonic cleaner.
- The ZEROED 36 is HUB compatible (1.375″-24 pattern), allowing use of any third-party QD mount and muzzle device system.
- Features a 3/8 square drive welded front end cap and 7/8 wrench flats on the HUB mount, enabling removal with common tools and no special tools required.
Show all 10 ▾ ▴
- All ZEROED suppressors are manufactured 100% in-house at CMMG's facility for maximum quality control and affordability.
- Constructed from heat treated 17-4 stainless steel, chosen for durability and structural integrity.
- All ZEROED suppressors are full-auto rated, with approximately 240 rounds between cooldown periods.
- The ZEROED 36 is designed for 9mm or smaller centerfire pistol calibers and 350 Legend/8.6 BLK or smaller centerfire rifle cartridges.
- Each ZEROED 36 ships with one 1/2″-28 direct thread HUB mount and one 5/8″-24 direct thread HUB mount.
- Minimum barrel length requirements are 6.5″ for 8.6 BLK, 10.5″ for 350 Legend, and 20″ for 300 PRC.