CMMGZEROED 30
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Multi-Caliber
- Full-Auto Rated
- Sealed
length
6.5″
weight
14.5oz
MSRP
$749
length
6.5″
weight
14.5oz
calibers
5.56–.30
material
Steel
interface
HUB 1.375x24
MSRP
$749
- Overall length
- 6.5″
- Diameter
- 1.5″
- Weight
- 14.5 oz
- Material
- 17-4 Stainless Steel
- Finish / treatment
- Nitride
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
- MSRP
- $749
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Cheaper than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including CMMG ZEROED HUB Adapter, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Features a tubeless laser welded 17-4 stainless steel baffle design for structural integrity and suppression performance.
- Receives a surface-hardening nitride finish that resists corrosion and simplifies cleaning, compatible with nearly any solvent or ultrasonic cleaner.
- All centerfire ZEROED suppressors are 1.375″-24 HUB mount compatible, allowing use of preferred QD mount and muzzle device systems.
- Features a 3/8 square drive welded front end cap and 7/8 wrench flats on the HUB mount, enabling disassembly with common tools and no special tools required.
Show all 10 ▾ ▴
- Manufactured 100% in-house at CMMG's facility for maximum quality control and affordability.
- Full 17-4 stainless steel construction with heat treatment provides durability and superior corrosion resistance.
- Rated for full-auto fire with approximately 240 rounds between cooldown periods.
- Built for .30 caliber or smaller centerfire cartridges, optimized for platforms such as .308 Win DMR, 300 BLK PDW, and 7.62x39mm carbine.
- Each suppressor ships with one 1/2″-28 direct thread HUB mount and one 5/8″-24 direct thread HUB mount.
- Minimum barrel length requirements are 6.5″ for 300 BLK, 12.5″ for .308 Win, and 20″ for 300 PRC.