BOSS SilencersCommander 9
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- No Barrel Restrictions
- TBAC Summit Tested
- Full-Auto Rated
length
8″
weight
11.5oz
MSRP
$1,150
length
8″
weight
11.5oz
calibers
9mm
material
Titanium
interface
HUB 1.375x24
MSRP
$1,150
- Overall length
- 8″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 3.5″–13.7″
- Median
- 6.95″
- Diameter
- 1.5″
- Weight
- 11.5 oz
- Material
- Grade 5 6Al4V Titanium / Grade 9 Titanium
- Max caliber
- 9mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Low
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- MSRP
- $1,150
- Class
- 9mm / .36 Cal
- n
- 176
- Range
- $260–$2,888
- Median
- $802
Longer than most 9mm / .36 Cal suppressors
Length compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most 9mm / .36 Cal suppressors
MSRP compared against the 176 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including BOSS Silencers Direct Thread Adapter, HUB (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. Commander 9 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- This allows the Commander to suppress sub-sonic 9mm much more efficiently than most other designs.
- The BOSS Commander features our ultra-low back-pressure, Jet Diffusion Technology, which was inspired by rocket engine designs. Where rocket engines aim to accelerate gasses, our Jet Diffusion Technology inverts the flow to accept high speed gasses and slows them down using multiple, progressive diffusion chambers.
- Grade 9 Titanium tube with a Ti 6Al4V baffle stack, 11.5oz without mount.
- The Commander 9mm is designed to provide maximum sound suppression for any 9mm platform.
Show all 6 ▾ ▴
- The Commander includes a direct thread mount in 1/2 - 28, but accepts any standard HUB 1.375-24 pattern mount, including SilencerCo ASR Bravo, or DeadAir Keymo, as examples.
- No barrel restrictions, optimized for sub-sonic 9mm.