BOSS SilencersChairman Titanium
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- No Barrel Restrictions
- PEW Science Reviewed
- TBAC Summit Tested
- Full-Auto Rated
length
8″
weight
11.5oz
MSRP
$800
length
8″
weight
11.5oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
MSRP
$800
- Overall length
- 8″
- Diameter
- 1.5″
- Weight
- 11.5 oz
- Material
- Grade 5 6Al4V Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- BOSS 1.5in Endcap
- Full-auto rated
- Yes
- Barrel restriction
- None (manufacturer stated)
- PEW Science describes the Chairman as a 30 caliber centerfire rifle silencer intended to suppress many cartridges with projectiles appropriately sized to travel through the bore, on barrel lengths 10.5-in and longer.
- MSRP
- $800
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- BOSS 1.5in Endcap
The HUB 1.375x24 is an open standard: 468 mounts and 882 muzzle devices in our catalog fit this suppressor, including BOSS Silencers Direct Thread Adapter, HUB (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Chairman Titanium was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Measured sound results are in the Sound tests section above.
PEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- The Chairman features our proprietary, Nikola Tesla-inspired, Coaxially-vented baffles that route the gasses through the silencer for a longer duration than in a standard baffle configuration, dramatically reducing the overall volume of the weapon when compared to other silencers of similar size.
- Stainless Steel model: 17-4 H900 Stainless Steel baffles, mount and cap with a Grade 9 Titanium tube, 16oz without mount. Titanium model: Grade 5 6Al4V baffles, mount and cap with a Grade 9 Titanium tube and a 17-4 H900 blast baffle, 11.5oz without mount.
- The BOSS Chairman is our unrivaled .30cal silencer option, offering the best sound suppression for your high-velocity, 7.62mm/308 long rifles, but also gets your 300 Blackout rigs scary close to movie quiet.
- For AR10/15s or any other gas impingement firearms, we recommend selecting the vented cap option for dramatically reduced back pressure and gas exposure. Bolt guns should use the standard end cap option.
Show all 6 ▾ ▴
- Includes a direct thread mount in 5/8 - 24, but accepts any standard HUB 1.375-24 pattern mount, including SilencerCo ASR Bravo, or DeadAir Keymo, as examples.
- As of 12/12/2025 the Chairman is offered with a Recoil X Brake from the factory as an option.
