BOE SuppressionMod 1
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer and independent testers
Notable features
- HUB Compatible
- Multi-Caliber
- User Serviceable
- PEW Science Reviewed
- Full-Auto Rated
length
7.5″
weight
13.5oz
MSRP
$895
length
7.5″
weight
13.5oz
calibers
5.56–.30
material
Titanium · Steel
interface
HUB 1.375x24
MSRP
$895
- Overall length
- 7.5″
- Diameter
- 1.5″
- Weight
- 13.5 oz
- Material
- Titanium / Stainless
- Finish / treatment
- D360
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
- Backpressure
- Standard
- Full-auto rated
- Yes
- Maintenance
- User serviceable
- MSRP
- $895
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Fixed
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderPEW Science · independent test
This suppressor has been independently sound-tested by PEW Science.
Manufacturer claim
- The Mod 1 uses a patented pressure equalization technology that eliminates noticeable back pressure being introduced into the weapon system.
- BOE suppressors use advanced mono-core designs optimized by caliber to reduce back pressure and maximize efficiency while maintaining the rifle's gas system integrity.
- Each BOE core is threaded for the universal 1.375-24 HUB / Bravo style of adapters and is compatible with almost every option on the market.
- The Mod 1 utilizes a completely symmetrical inner core with a concentric inner aperture to ensure even pressure dispersion for enhanced accuracy and minimal point of impact shift.
Show all 17 ▾ ▴
- The suppressor features caliber-specific inner core and endcap designs available in both vented and non-vented variations to essentially eliminate flash signature.
- Each BOE suppressor is engineered for full serviceability through a straightforward two-piece design, allowing easy maintenance by the end user or armorer.
- The two-piece design ensures the outer tube remains functional if the suppressor is damaged through misalignment or projectile failure, with the core acting as a replaceable failsafe.
- The D360™ coating process provides comprehensive multi-stage coverage of both internal and external surfaces, unlike other suppressors that do not coat internal surfaces.
- The Mod 1's advanced pressure equalization technology and optimized geometries result in reduced wear on the weapon and lower toxic gas exposure for the operator.
- The Inconel core option uses Inconel 718, chosen for ultimate durability, while the titanium core option uses Ti64 Grade 23 Titanium, chosen for maximum weight reduction.
- The outer tube across all Mod 1 and Mod 1S variants is constructed from Grade 9 Titanium.
- The D360™ coating significantly reduces internal surface erosion and features strong carbon-phobic properties to minimize carbon buildup.
- The 5.56mm-rated Mod 1 is optimized for 5.56 NATO, .223 REM, 22 ARC, and 224 Valkyrie.
- The .30 CAL-rated Mod 1 is optimized for 7.62 NATO, .308 WIN, 300 Win Mag, and 7.62x39mm.
- The .360-rated Mod 1 is optimized for 350 Legend, 35 REM, and 357 MAG.
- The .460-rated Mod 1 is optimized for 450 Bushmaster, 458 SOCOM, 400 Legend, and 45-70.
- The Mod 1S compact suppressor is available in 5.56mm and .30 CAL ratings, optimized for the same caliber families as the full-size Mod 1.