BlackbirdF762
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
- Haynes 282
length
6.75″
weight
17.3oz
MSRP
$1,099
length
6.75″
weight
17.3oz
calibers
5.56–.30
material
Haynes 282
interface
HUB 1.375x24
MSRP
$1,099
- Overall length
- 6.75″
- Diameter
- 1.6″
- Weight
- 17.3 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- HAYNES® 282
- Max caliber
- 7.62mm
- Base interface
- HUB 1.375x24
- MSRP
- $1,099
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including Blackbird HUB Taper Direct Thread Mount 1/2-28, AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. F762 was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- At the core of the system is Blackbird's patent-pending Staged Pressure Vectoring, designed to control internal pressure release, reduce shooter gas exposure, and drive blast energy forward.
- Built around a 1.6" diameter profile, the F762 balances volume, strength, and flow efficiency to support reliable performance across a wide range of centerfire platforms.
- Mount compatibility: available in HUB Taper and 1x16L Acme Taper.
- Constructed from either HAYNES 282 or Titanium Ti-6Al-4V, the F762 is available in configurations tailored for sustained, high-endurance firing schedules or weight-optimized setups.
Show all 6 ▾ ▴
- Blackbird Suppressors are backed by an unlimited lifetime warranty. If your suppressor doesn't perform to standard, we'll make it right.
- While optimized for 7.62, the system scales exceptionally well to 5.56 and lower-pressure cartridges such as .300 BLK, maintaining stable gas behavior without compromising reliability.