B&TSMG-M-9
9mm / .36 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Modular Length
length
6.1–9.2″
weight
19.8oz
length
6.1–9.2″
weight
19.8oz
calibers
9mm
material
Titanium
interface
HUB 1.375x24
- Overall length
- 9.2″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 3.5″–13.7″
- Median
- 6.95″
- Diameter
- 1.7″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 1″–2″
- Median
- 1.5″
- Weight
- 19.8 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- Titanium
- Max caliber
- 9mm
- Base interface
- HUB 1.375x24
- Front cap
- none
Longer than most 9mm / .36 Cal suppressors
Length compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Wider than most 9mm / .36 Cal suppressors
Diameter compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most 9mm / .36 Cal suppressors
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
Configurations
- Long9.2″ · 19.8oz
- Short6.1″ · 13.6oz
- Base interface
- HUB 1.375x24
- Front cap
- none
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including B&T Direct Thread HUB Lightweight Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- Where Rapid Deployment Meets Modular Innovation Introducing the SMG-M-9 9mm, B&T’s latest fusion of Reduced Backpressure System (RBS) technology and an all-new Rapid Quick Disconnect (RQD) tri-lug mount.
- This next-level suppressor attaches in seconds with just a twist onto any 9mm barrel with in-spec tri-lugs—like B&T’s APC9, SPC9, GHM9, or HK’s MP5 series.
- Locking in place without fuss, the RQD system is among the fastest 3-lug attachments on the market.
- Construction: Modular, 3D Printed, Weldless Design - Printed from 100% titanium for a lightweight and durable main tube. HUB Compatible - The included RQD (Rapid Quick Disconnect) 3-Lug Mount is interchangeable with any other standard TPI 9mm HUB mount
Show all 5 ▾ ▴
- Ships With: Suppressor Body / SQD HUB / Vented and Non-vented Endcaps / Wrench / Manual