B&TRanger SS
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.3″
weight
7.8oz
length
6.3″
weight
7.8oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
- Overall length
- 6.3″
- Class
- .30 Cal / 7.62mm
- n
- 638
- Range
- 2.5″–14″
- Median
- 7.24″
- Diameter
- 1.72″
- Weight
- 7.8 oz
- Class
- .30 Cal / 7.62mm
- n
- 631
- Range
- 4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- none
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 638 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 631 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
- Front cap
- none
The HUB 1.375x24 is an open standard: 489 mounts and 934 muzzle devices in our catalog fit this suppressor, including B&T Direct Thread HUB Lightweight Adapter (1/2x28), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Ranger SS was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
- .300 Blackout subsonic, 16" bolt-action rifle 2025133.7 dBat the ear · 16.0 dB quieter than unsuppressed84 tested →
- .308, 20" bolt-action rifle 2025140.9 dBat the ear · 15.0 dB quieter than the 2024 unsuppressed baseline70 tested →
- .300 Win Mag, 26" bolt-action rifle 2025143.6 dBat the ear · 13.6 dB quieter than unsuppressed67 tested →
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Meet the hunting series B&T Print-X Ranger.
- Construction: 3D Printed of Weldless Titanium Modular Endcap; Brake Included HUB Compatible
- Featuring a recoil reducing muzzle brake endcap, balanced and lightweight titanium construction, and superior sound attenuation, this is the ultimate hunting suppressor, backed by the expertise of B&T.
- Ship With: Wrench Manual 5/8x24 Low Profile Direct Thread HUB Modular Brake Endcap
