Angled Spade TechnologiesFulcrum-Ti
6mm / 6.5mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
length
6.02″
weight
7.7oz
MSRP
$899
length
6.02″
weight
7.7oz
calibers
5.56 | 6.5
material
Grade 5 Ti
interface
HUB 1.375x24
MSRP
$899
- Overall length
- 6.02″
- Diameter
- 1.6″
- Weight
- 7.7 oz
- Class
- 6mm / 6.5mm
- n
- 123
- Range
- 4.4 oz–23.9 oz
- Median
- 12.7 oz
- Material
- Grade 5 Ti
- Max caliber
- 6mm / .223
- Base interface
- HUB 1.375x24
- Firing schedule
- Safe to 900°F
- MSRP
- $899
Lighter than most 6mm / 6.5mm suppressors
Weight compared against the 123 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Manufacturer notes
Leverage isn't given. It's taken. A fully sealed suppressor with a proprietary baffle system featuring our Axial Pressure Exchange (APEX) technology. APEX delivers maximum suppression via a dual bypass system to minimize back pressure and balance gases throughout the baffle stack. Printed Titanium design optimized for your precision rifle and lightweight builds.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 489 mounts and 934 muzzle devices in our catalog fit this suppressor, including Angled Spade Technologies APB (HUB), AAC 51T S.T.A.M.P. Mount and AB Suppressor AB Raptor Adapter. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, with the same equipment. Fulcrum-Ti was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Rated safe to 900°F.
- APEX (Axial Pressure Exchange) is a dual internal bypass baffle system built to minimize back pressure and balance gas flow throughout the baffle stack.
- Printed titanium construction optimized for precision rifle and lightweight builds.
- Optimized for 5.56 NATO while also supporting hard-use 6mm caliber projectiles including 6 ARC, 6 MAX, 6 GT, 6 Dasher, 6mm Creedmoor and .243 WIN.
Show all 5 ▾ ▴
- Includes a dog bone wrench, spanner wrench, and Angled Spade patch.
