AMTAC SuppressorsTAO
.22 Cal / Rimfire suppressor · 1/2x28 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Full-Auto Rated
- Rimfire Only
- Direct Thread
length
5.3″
weight
5.75oz
MSRP
$400
length
5.3″
weight
5.75oz
calibers
.22 rimfire
material
Steel
interface
1/2x28 Direct Thread
MSRP
$400
- Overall length
- 5.3″
- Diameter
- 1″
- Weight
- 5.75 oz
- Class
- .22 Cal / Rimfire
- n
- 147
- Range
- 0.9 oz–13.5 oz
- Median
- 4.1 oz
- Material
- Stainless Steel
- Max caliber
- .22 LR to 5.7x28
- Base interface
- 1/2x28 Direct Thread
- Front cap
- none
- Full-auto rated
- Yes
- MSRP
- $400
Heavier than most .22 Cal / Rimfire suppressors
medianTHIS SUPPRESSOR · 5.75 oz
0.9 oz13.5 oz
Weight compared against the 147 .22 Cal / Rimfire suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 1/2x28 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- AMTAC states its suppressors are full-auto rated.
- Suppression: up to 37dB.
- The AMTAC uniBaffle design continues to add velocity while the bullet travels through the suppressor, which AMTAC calls suppressor push and says leads to a higher muzzle velocity and flatter trajectory for long-range shooting. As the bullet passes through the uniBaffle, the air around it loses pressure gradually instead of all at once, which AMTAC says reduces the standard deviation of muzzle velocity by up to 20% and results in tighter groups and a smaller vertical spread on long-range targets.
- TAO: Length 5.3", Diameter 1", Thread 1/2 x 28, Max Barrel Diameter unlimited (no over-barrel chamber).
Show all 8 ▾ ▴
- The TAO's baffle structure is cut from a single piece of hardened stainless steel to increase accuracy and make it tough enough for a lifetime of use.
- AMTAC Suppressors are made using materials of the highest quality and machined to exacting tolerances in the USA. They are designed to provide reliable service for tens of thousands of rounds, and come with a limited lifetime warranty.
- TAO - .22LR RIMFIRE SUPPRESSOR - Our premium rimfire suppressor, the TAO is built to handle a wide range of calibers from .22 to 5.7x28, and with up to 36dB of noise reduction, it is impressively quiet.
- AMTAC rates the TAO for .22LR, .17 WSM, .17HMR, .22 WMR, .22 and 5.7 x 28, with 5.7x28 requiring a 16" barrel or longer.