AMTAC SuppressorsRONGO E
.30 Cal / 7.62mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Full-Auto Rated
- Direct Thread
length
7.7″
weight
21oz
MSRP
$1,125
length
7.7″
weight
21oz
calibers
5.56–.30
material
Steel
interface
5/8x24 Direct Thread
MSRP
$1,125
- Overall length
- 7.7″
- Diameter
- 1.62″
- Weight
- 21 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- 17-4 PH Stainless Steel
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- 5/8x24 Direct Thread
- Front cap
- none
- Full-auto rated
- Yes
- MSRP
- $1,125
Heavier than most .30 Cal / 7.62mm suppressors
medianTHIS SUPPRESSOR · 21 oz
4.4 oz39.8 oz
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- AMTAC states its suppressors are full-auto rated.
- Suppression: up to 28dB.
- The AMTAC uniBaffle design continues to add velocity while the bullet travels through the suppressor, which AMTAC calls suppressor push and says leads to a higher muzzle velocity and flatter trajectory for long-range shooting. As the bullet passes through the uniBaffle, the air around it loses pressure gradually instead of all at once, which AMTAC says reduces the standard deviation of muzzle velocity by up to 20% and results in tighter groups and a smaller vertical spread on long-range targets.
- AMTAC Suppressors are made using materials of the highest quality and machined to exacting tolerances in the USA. They are designed to provide reliable service for tens of thousands of rounds, and come with a limited lifetime warranty.
Show all 7 ▾ ▴
- The RONGO E - .30 CAL is an end-mount suppressor for rifles where over-barrel is not an option. Adding only 7.7" to your rifle's overall length, this suppressor offers excellent suppression and compatibility with .30 caliber rifles and is magnum-rated.
- AMTAC: a .30 (762) suppressor will provide slightly less noise reduction when used on a .223 than an appropriately sized .223 (556) suppressor will, but it is still a drastic difference compared to an unsuppressed rifle. You will need a 5/8-24 to 1/2-28 thread adapter.
- RONGO E End Mount - No Over Barrel Chamber.