AMTAC SuppressorsKU
9mm / .36 Cal suppressor · 1/2x36 Over-Barrel interface · specs and compatibility from the manufacturer
Notable features
- Full-Auto Rated
length
7.7″
weight
16.6oz
MSRP
$990
length
7.7″
weight
16.6oz
calibers
9mm
material
Steel
interface
1/2x36 Over-Barrel
MSRP
$990
- Overall length
- 7.7″
- Diameter
- 1.62″
- Weight
- 16.6 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- 17-4 PH Stainless Steel
- Max caliber
- 9mm
- Base interface
- 1/2x36 Over-Barrel
- Front cap
- none
- Full-auto rated
- Yes
- MSRP
- $990
Heavier than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 16.6 oz
2.5 oz23 oz
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 1/2x36 Over-Barrel. Nothing in the catalog attaches to it yet; check with the manufacturer for the hardware it takes.
Manufacturer claim
- AMTAC states its suppressors are full-auto rated.
- Suppression: Up to 30dB.
- The AMTAC uniBaffle design continues to add velocity while the bullet travels through the suppressor, which AMTAC calls suppressor push and says leads to a higher muzzle velocity and flatter trajectory for long-range shooting. As the bullet passes through the uniBaffle, the air around it loses pressure gradually instead of all at once, which AMTAC says reduces the standard deviation of muzzle velocity by up to 20% and results in tighter groups and a smaller vertical spread on long-range targets.
- The KU - 9MM fits under most handguards and its single-piece baffle threads directly to your barrel, making this suppressor extremely accurate and allowing you to squeeze every inch of effective range out of your carbine.
Show all 9 ▾ ▴
- AMTAC Suppressors are made using materials of the highest quality and machined to exacting tolerances in the USA. They are designed to provide reliable service for tens of thousands of rounds, and come with a limited lifetime warranty.
- Designed specifically for Pistol Caliber Carbines, the KU - 9MM features an over-barrel design to add minimal length while drastically reducing both sound and recoil. This unique suppressor adds only 3.7" to your carbine's overall length, and it fits under most handguards.
- The AMTAC KU - 9mm is available in two colors: Black and FDE.
- Over-barrel suppressors have to fit over the rifle barrel and thread securely into place without touching the gas system on semi-auto rifles, so barrel length, barrel diameter and gas system all matter. AMTAC lists the working barrel / gas system combinations for all over-barrel models as 20" barrel with rifle-length gas system, 16" with mid-length, 14" with carbine-length, and 10.5" with pistol-length.
- KU: 0.750" barrel diameter and 4" from muzzle brake to gas block.