AMTAC SuppressorsKOA CQC
5.56mm / .223 suppressor · 1/2x28 Over-Barrel interface · specs and compatibility from the manufacturer
Notable features
- Full-Auto Rated
length
7.7″
weight
17oz
MSRP
$1,050
length
7.7″
weight
17oz
calibers
5.56
material
Steel
interface
1/2x28 Over-Barrel
MSRP
$1,050
- Overall length
- 7.7″
- Class
- 5.56mm / .223
- n
- 328
- Range
- 2.5″–9.75″
- Median
- 6.12″
- Diameter
- 1.62″
- Weight
- 17 oz
- Class
- 5.56mm / .223
- n
- 328
- Range
- 1.7 oz–27 oz
- Median
- 13 oz
- Material
- 17-4 PH Stainless Steel
- Max caliber
- 5.56mm / .223
- Base interface
- 1/2x28 Over-Barrel
- Front cap
- none
- Full-auto rated
- Yes
- MSRP
- $1,050
Longer than most 5.56mm / .223 suppressors
Length compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Heavier than most 5.56mm / .223 suppressors
Weight compared against the 328 5.56mm / .223 suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 1/2x28 Over-Barrel. Nothing in the catalog attaches to it yet; check with the manufacturer for the hardware it takes.
Manufacturer claim
- AMTAC states its suppressors are full-auto rated.
- Suppression: Up to 28dB.
- The AMTAC uniBaffle design continues to add velocity while the bullet travels through the suppressor, which AMTAC calls suppressor push and says leads to a higher muzzle velocity and flatter trajectory for long-range shooting. As the bullet passes through the uniBaffle, the air around it loses pressure gradually instead of all at once, which AMTAC says reduces the standard deviation of muzzle velocity by up to 20% and results in tighter groups and a smaller vertical spread on long-range targets.
- The KOA CQC is an over-barrel 5.56 suppressor with a 4" over-barrel length and a 1.62" diameter, weighing 17oz.
Show all 10 ▾ ▴
- AMTAC's flagship over-barrel suppressor, the KOA 5.56 is designed around a 16" barrel with a carbine-length gas system. The shortest version adds only 3.7" to a rifle's overall length.
- AMTAC Suppressors are made using materials of the highest quality and machined to exacting tolerances in the USA. They are designed to provide reliable service for tens of thousands of rounds, and come with a limited lifetime warranty.
- The KOA CQC adds only 3.7" of additional length to your system and is ideal for short platforms. It is the ideal option for close quarters, allowing for better maneuverability.
- Over-barrel suppressors have to fit over the rifle barrel and thread securely into place without touching the gas system on semi-auto rifles, so barrel length, barrel diameter and gas system all matter. AMTAC lists the working barrel / gas system combinations for all over-barrel models as 20" barrel with rifle-length gas system, 16" with mid-length, 14" with carbine-length, and 10.5" with pistol-length.
- KOA CQC: 0.750" barrel diameter and 4" from muzzle brake to gas block.
- AMTAC: at this time, we do not recommend using our 556 suppressors on .22 rimfire rifles.