Airlock IndustriesZero Gravity 7mm
6mm / 6.5mm suppressor · 5/8x24 Direct Thread interface · specs and compatibility from the manufacturer
Notable features
- Direct Thread
length
5.5″
weight
6.6oz
MSRP
$975
length
5.5″
weight
6.6oz
calibers
5.56 | 6.5
material
Titanium
interface
5/8x24 Direct Thread
MSRP
$975
- Overall length
- 5.5″
- Diameter
- 1.7″
- Weight
- 6.6 oz
- Class
- 6mm / 6.5mm
- n
- 98
- Range
- 4.4 oz–23.9 oz
- Median
- 12.45 oz
- Material
- 3D printed titanium
- Max caliber
- 7mm
- Base interface
- 5/8x24 Direct Thread
- Full-auto rated
- No
- Barrel restriction
- 16" minimum
- Firing schedule
- 15 rounds per minute and not more than 1 round per second, then let cool; never exceed 800 degrees F
- MSRP
- $975
Lighter than most 6mm / 6.5mm suppressors
medianTHIS SUPPRESSOR · 6.6 oz
4.4 oz23.9 oz
Weight compared against the 98 6mm / 6.5mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
Mount interface: 5/8x24 Direct Thread. It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- Our ZG6.5, ZG7, and our ZG30 cans are rated for use with +Peak ammo.
- Sound at ear 128.5 dB, sound at muzzle 137 dB. Measured on a 20" 6.5 Creedmoor shooting Federal Gold Medal Match 140 SMK. Recorded with Larson Davis 821IH-QPR.
- Our patented Vector technology violently disrupts the gas flow inside the suppressor, increasing turbulence and slowing the gases. That controlled disruption reduces gas energy and sound signature, making the suppressor significantly quieter and more efficient for its compact form factor.
- Features a built in 5/8-24 direct thread mount.
Show all 13 ▾ ▴
- US Registered Patent No.: 12,613,072
- Our suppressors are 100% made in Idaho, USA, from start to finish.
- Crafted from Aerospace-grade 3D printed titanium.
- Our warranty covers manufacturer defects and normal use only. Warranty is voided by misuse, abuse, modification, improper mounting, or use on unrated calibers or barrel lengths.
- Airlock recommends cleaning the suppressor after it gains an ounce of carbon: soak it in a suppressor cleaning solution that breaks up carbon, flush thoroughly and dry well. An ultrasonic cleaner is also an option. Thread locker is not recommended.
- Designed without compromise, the Zero Gravity 7mm is purpose-built for backcountry hunters.
- Barrel Restrictions: 16" Short Action Magnums (6.5 PRC, 7mm WSM, etc.); 20" Standard Action Magnum (7 PRC, 7mm Rem Mag, 28 Nosler, etc.). Approved for 7mm BackCountry down to a 16" barrel.
- Fire rate: 15RPM & not more than 1 round per second - then let cool (NEVER exceed 800 F).
- If you are using a Zero Gravity 7mm suppressor, you can safely run smaller calibers such as 6.5mm or 6mm. You cannot use a caliber larger than what the suppressor is rated for.