AB SuppressorRaptor 8
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
- Sealed
length
6.3″
weight
8.05oz
length
6.3″
weight
8.05oz
calibers
5.56–.338+
material
Titanium
interface
HUB 1.375x24
- Overall length
- 6.3″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 5.3″–22.5″
- Median
- 9.16″
- Diameter
- 1.63″
- Weight
- 8.05 oz
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 6.85 oz–105.3 oz
- Median
- 19 oz
- Material
- Grade 5 Titanium
- Max caliber
- .375 Cal / .338
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
Shorter than most Large Bore (.338+) suppressors
Length compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most Large Bore (.338+) suppressors
Weight compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AB Suppressor AB Raptor Adapter, AAC 51T S.T.A.M.P. Mount and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- AB Spiral Technology uses spiral shaped baffles to keep the gasses moving while reducing back pressure; the reduced pressure also creates a much lower tone at the shooter's ear.
- The Raptor's spirals, end cap, blast chamber and mounts are all constructed from 100% Titanium, and the circumference welded construction makes for a tubeless design which decreases total system weight.
- Each Raptor suppressor is sold with a Reflex mount, flush mount, end cap and six pin tool.