AB SuppressorRaptor 6
.338 Cal suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
- Sealed
length
5.5″
weight
6.85oz
length
5.5″
weight
6.85oz
calibers
5.56–.338
material
Titanium
interface
HUB 1.375x24
Photos
Image: AB Suppressor
- Overall length
- 5.5″
- Class
- .338 Cal
- n
- 74
- Range
- 5.5″–12.6″
- Median
- 9″
- Diameter
- 1.63″
- Weight
- 6.85 oz
- Class
- .338 Cal
- n
- 72
- Range
- 6.85 oz–48.2 oz
- Median
- 17 oz
- Material
- Grade 5 Titanium
- Max caliber
- .338 Cal
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
Shorter than most .338 Cal suppressors
Length compared against the 74 .338 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .338 Cal suppressors
Weight compared against the 72 .338 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 489 mounts and 934 muzzle devices in our catalog fit this suppressor, including AB Suppressor AB Raptor Adapter, AAC 51T S.T.A.M.P. Mount and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- AB Spiral Technology uses spiral shaped baffles to keep the gasses moving while reducing back pressure; the reduced pressure also creates a much lower tone at the shooter's ear.
- The Raptor's spirals, end cap, blast chamber and mounts are all constructed from 100% Titanium, and the circumference welded construction makes for a tubeless design which decreases total system weight.
- Each Raptor suppressor is sold with a Reflex mount, flush mount, end cap and six pin tool.
