AB SuppressorRaptor 4
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Full-Auto Rated
- Sealed
length
4.7″
weight
5.6oz
length
4.7″
weight
5.6oz
calibers
5.56–.30
material
Titanium
interface
HUB 1.375x24
- Overall length
- 4.7″
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 3.5″–12.25″
- Median
- 7.4″
- Diameter
- 1.63″
- Weight
- 5.6 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- Grade 5 Titanium
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
Shorter than most .30 Cal / 7.62mm suppressors
Length compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AB Suppressor AB Raptor Adapter, AAC 51T S.T.A.M.P. Mount and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderManufacturer claim
- AB Spiral Technology uses spiral shaped baffles to keep the gasses moving while reducing back pressure; the reduced pressure also creates a much lower tone at the shooter's ear.
- The Raptor's spirals, end cap, blast chamber and mounts are all constructed from 100% Titanium, and the circumference welded construction makes for a tubeless design which decreases total system weight.
- Each Raptor suppressor is sold with a Reflex mount, flush mount, end cap and six pin tool.