AB SuppressorRaptor 10
Large Bore (.338+) suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- TBAC Summit Tested
- Full-Auto Rated
- Sealed
length
7.2″
weight
9.5oz
length
7.2″
weight
9.5oz
calibers
5.56–.338+
material
Titanium
interface
HUB 1.375x24
- Overall length
- 7.2″
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 5.3″–22.5″
- Median
- 9.16″
- Diameter
- 1.63″
- Weight
- 9.5 oz
- Class
- Large Bore (.338+)
- n
- 124
- Range
- 6.85 oz–105.3 oz
- Median
- 19 oz
- Material
- Grade 5 Titanium
- Max caliber
- .375 Cal / .338
- Base interface
- HUB 1.375x24
- Full-auto rated
- Yes
- Maintenance
- Sealed (not user serviceable)
Shorter than most Large Bore (.338+) suppressors
Length compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most Large Bore (.338+) suppressors
Weight compared against the 124 Large Bore (.338+) suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
- Base interface
- HUB 1.375x24
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AB Suppressor AB Raptor Adapter, AAC 51T S.T.A.M.P. Mount and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. Raptor 10 was measured in 1 test. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- AB Spiral Technology uses spiral shaped baffles to keep the gasses moving while reducing back pressure; the reduced pressure also creates a much lower tone at the shooter's ear.
- The Raptor's spirals, end cap, blast chamber and mounts are all constructed from 100% Titanium, and the circumference welded construction makes for a tubeless design which decreases total system weight.
- Each Raptor suppressor is sold with a Reflex mount, flush mount, end cap and six pin tool.