AB SuppressorF-4
9mm / .36 Cal suppressor · Direct Thread (pitch unpublished) interface · specs and compatibility from the manufacturer
Notable features
- Sealed
- Direct Thread
length
4.9″
weight
4.5oz
length
4.9″
weight
4.5oz
calibers
9mm
material
Titanium
interface
Direct Thread (pitch unpublished)
- Overall length
- 4.9″
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 3.5″–13.7″
- Median
- 6.95″
- Diameter
- 1.5″
- Weight
- 4.5 oz
- Class
- 9mm / .36 Cal
- n
- 202
- Range
- 2.5 oz–23 oz
- Median
- 9.65 oz
- Material
- Grade 5 Titanium
- Max caliber
- 9mm
- Base interface
- Direct Thread (pitch unpublished)
- Maintenance
- Sealed (not user serviceable)
Shorter than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 4.9″
3.5″13.7″
Length compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Lighter than most 9mm / .36 Cal suppressors
medianTHIS SUPPRESSOR · 4.5 oz
2.5 oz23 oz
Weight compared against the 202 9mm / .36 Cal suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Not published by the manufacturer: MSRP.
Mount interface: Direct Thread (pitch unpublished). It threads straight onto the barrel, so no mount or muzzle device is involved.
Manufacturer claim
- The F-4 uses a flush direct-thread mount on the barrel's shoulder for an all-muzzle-forward design, keeping overall length and total system weight to an absolute minimum.
- The F-4 is built from 100% Grade 5 Titanium and circumference welded for maximum strength.
- Other centerfire pistol calibers which are 9mm in diameter or less (.38 special, .357mag, .380acp) are acceptable to fire through the F-4, as well as .300 AAC Blackout (subsonic only, 8 inch barrel minimum).