AAC762-SDN-6
.30 Cal / 7.62mm suppressor · HUB 1.375x24 interface · specs and compatibility from the manufacturer
Notable features
- HUB Compatible
- Low Backpressure
- TBAC Summit Tested
- Full-Auto Rated
length
7.05″
weight
20.5oz
MSRP
$1,199
length
7.05″
weight
20.5oz
calibers
5.56–.30
material
Inconel
interface
HUB 1.375x24
MSRP
$1,199
- Overall length
- 7.05″
- Diameter
- 1.63″
- Weight
- 20.5 oz
- Class
- .30 Cal / 7.62mm
- n
- 513
- Range
- 4.4 oz–39.8 oz
- Median
- 13.75 oz
- Material
- 3D Printed Inconel
- Max caliber
- .30 Cal / 7.62mm
- Base interface
- HUB 1.375x24
- Front cap
- Removable
- Backpressure
- Low
- Full-auto rated
- Yes
- MSRP
- $1,199
- Class
- .30 Cal / 7.62mm
- n
- 458
- Range
- $199–$2,160
- Median
- $999
Heavier than most .30 Cal / 7.62mm suppressors
Weight compared against the 513 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Pricier than most .30 Cal / 7.62mm suppressors
MSRP compared against the 458 .30 Cal / 7.62mm suppressors in the catalog that publish one. Quartile basis; a value inside the middle half carries no note.
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
- Base interface
- HUB 1.375x24
- Front cap
- Removable
The HUB 1.375x24 is an open standard: 415 mounts and 818 muzzle devices in our catalog fit this suppressor, including AAC 51T S.T.A.M.P. Mount, AB Suppressor AB Raptor Adapter and Abel Co Direct Thread Adapter 1/2x28. You aren't locked into one manufacturer's parts.
Which ones fit your barrel and host?
Check in the BuilderThe Thunder Beast Silencer Summit fires every suppressor entered on the same gun, on the same day, with the same equipment. 762-SDN-6 was measured in 3 tests. Figures can only be compared with others from the same test, so each one links to everything else fired on that gun.
Bolt-action and lever rifles
Gas-operated rifles and carbines
Measurements published by Thunder Beast Arms Corp. How to read these
Manufacturer claim
- Maximum caliber .308 Win; primary chambering 7.62 NATO.
- Fully 3D-printed Inconel construction with advanced back-pressure management and optimized internal geometry on a modern threaded taper mount.
- Fully 3D-printed Inconel construction.
- Advanced back-pressure management and optimized internal geometry.
Show all 7 ▾ ▴
- Uses a modern threaded taper mount; 1.375x24 HUB compatible, and mounts on a 1x16LH AAC Blackout flash hider.
- The do-everything 7.62 suppressor, lighter and stronger than its predecessors.
- AAC positions the 762-SDN-6 as the do-everything .30-calibre suppressor, working across precision rifles, SBRs and hunting setups.