Comstock ArmoryRetro 3-Prong Flash Hider (1/2x28)
Muzzle Device · attaches to 1/2x28 · presents Q Cherry Bomb · fits 650 suppressors in the catalog
length
1.8″
weight
2.1 oz
thread
1/2x28
material
17-4 PH Stainless Steel
standard
Q Cherry Bomb
MSRP
$75
A barrel adapter screws onto your rifle's threaded muzzle and stays there. It gives the muzzle a mounting interface, so the suppressor attaches to the adapter instead of the bare barrel threads. One adapter per rifle lets you move one suppressor between them. Many are quick-detach designs, and some also work as a muzzle brake or flash hider.
This one fits barrels threaded 1/2x28 and presents the Q Cherry Bomb interface. A suppressor with a matching Q Cherry Bomb mount attaches to it.
How mounting systems work →- Type
- Muzzle Device
- Overall length
- 1.8″
- Added length
- 1.17″
- Weight
- 2.1 oz
- Material
- 17-4 PH Stainless Steel
- Finish / treatment
- Black Nitride
- Attaches to
- 1/2x28
- Presents
- Q Cherry Bomb
- Tool access
- rear
- MSRP
- $75
Prices are manufacturer's suggested retail (MSRP). What you pay may differ.
650 suppressors in the catalog take this part, across 94 manufacturers including AAC, AB Suppressor, Abel Co. You aren't locked into one manufacturer's suppressors.
- AAC 300-SD
- AB Suppressor A-10 5.56
- Abel Co Biscuit
- …and 647 more.
Which ones fit your barrel and host?
See all 650 in the Builder- Retro inspired flash hider compatible with common .900″-24 adapters like the Comstock LPA, Q Plan-B, and Rearden Atlas. The 3-Prong offers solid flash performance and does not ring like many other pronged flash hiders.
- Standard 1/2-28 threads for use on 5.56/.223 barrels
- 3/4" wrench flats for easy installation and removal
- Rotationally symmetric and does not need to be timed with shims
- 1.8" overall length (~1.17" length added to muzzle)
- High strength 17-4 PH stainless steel
- Durable black nitride finish
- Allows for the quick attachment and removal of suppressors
- Effectively hides muzzle flash
- Fitment note with RPA: As the 3-Prong only has 2 wrench flats on the base (rather than our usual full hex), you cannot get a socket inside the RPA to unthread it in the event it gets stuck. Please make sure the muzzle device and adapter are installed properly (25 to 35 ft-lbs; Rocksett recommended) to avoid any issues.
- This muzzle device is NOT compatible with 9mm firearms.